| Description |
1. TENDER NOTICE
Delhi & District Cricket Association (DDCA) invites sealed Request for Proposal (RFP) from
reputed Contractors for renovation of common toilets work in Wing –A,B,C and Gate 2 & 3
and Hill - A at the Arun Jaitley Stadium.
Sealed Tender are invited for renovation of common toilets work in Wing – A, B, C and Gate
2 & 3 and Hill - A at the Arun Jaitley Stadium.
The RFP under Quality and Cost Based Selection method invited in Two Bid System from
competent Company / Firm/ Agency, who satisfy the eligibility criteria enumerated in the
tender document (RFP). Interested Agencies may download the tender documents from the
DDCA website: https://ddca.in/ddca-document/tender.
The RFP is being called to assess and approve the proposed ‘concept, design and
specifications’ submitted by the applicants. After assessment of the proposal by the
competent authority / selection committee, Price quotation of only the Approved Bidders
shall be opened and the work will be awarded as per terms and conditions of DDCA.
Last date for submission of RFP is 28/02/2023 up to 15:00. Sealed envelope marked to the
captioned address, containing RFP may be dropped in drop box specially kept for the subject
RFP mentioning “Request for Proposal for renovation of common toilets work in Wing – A,
B, C and Gate 2 & 3 and Hill - A at the Arun Jaitley Stadium. On the top cover at the
following address:
The Delhi and District Cricket Association (DDCA)
Arun Jaitley Stadium
Feroz Shah Kolta Ground
New Delhi – 110002
Work completion period: months
EMD: 2% of total project cost by way of a demand draft from a Nationalized or
Commercial Scheduled Bank.
Sr. No. Description Date Time
1 Publishing Date 18/02/2023 10:00 AM
2 Document Download Start Date 18/02/2023 10:00 AM
3 Document Download End Date 28/02/2023 03:00 PM
4 Bid Submission Start Date 18/02/2023 10:00 AM
5 Bid Submission End Date 28/02/2023 03:00 PM
6 Bid Opening Date 28/02/2023 05:00 PM
DDCA reserves the right to accept or reject any/all RFP without assigning any reason
whatsoever.
2. Background
a) Arun Jaitley Stadium is an International Cricket Stadium.
b) There is a requirement to renovation of common toilets work in Wing – A, B, C and
Gate 2 & 3 and Hill - A at the Arun Jaitley Stadium.
a) Design, execute - world class quality for renovation of common toilets work in Wing
– A, B, C and Gate 2 & 3 and Hill - A
b) The submission of RFP doesn’t guarantee the allotment of the work/ contract.
3. Description of work ( Annexure –A)
Sample of common toilet (Sample layout Attached) and BOQ for this work under
below as annexure –A
S.No. Description of work Unit Qty Rate Amont
1 Dismantling and disposal of all the
dismanted part complete
Lot 1
2 Providing and laying to pattern tile flooring
for called of areas., using tiles of approved
size, colour and make to pattern over 20mm
thick or more cement mortar bed (to make
up required finished floor level) of 1:6 mix
including joints shall be pointed with the
matching epoxy grout as recommended by
Laticrete/ Ardex Endura or approved
equivalent make and acid washing, etc., the
rate inclusive of providing necessary spacers
of size 2~3mm to ensure uniform joints etc.
complete. Allow for plastic sheet and POP
protective layers, removal and cleaning up,
with all lead and lift and as directed by
Project Consultant/Engineer in charge Base
Rate 80 Rps Per Sft
Sqm 244
3Providing and Fixing in position] Tile of
approved make, size 600mm x 600mm,
colour and shade for cladding in approved
pattern to true line and level on average 19
mm thk backing coat plaster in 1:4 mix
cement sand mortar, 1:1 cement grout,
filling the joints with white / colour cement
including cleaning, watering, curing, filling,
Edge Polishing (if visible), etc. complete as
per detail drawing, as specified and as
directed by Project Manager. Base Rate 80
s
S
q
m
525
Rps Per Sft
4Brick partitions with tiles finish as approved
by the Advisor(Architecture) DDCA 2400mm
high
R
m
30
5Providing and Fixing 12 mm thk MR grade
gypsum board of approved make on metallic
grid conforming to IS:2095:1982. Focus on
acheiving a smooth finish on the surface.
The metallic grid shall consist of the
following components: GI Perimeter of size
27 mm and 0.5 mm thk having one flange of
20 mm and another flange of 30 mm. GI
Intermediate channel of size 45 mm and 0.5
mm thk with two flange of 15 mm each at
1200 mm centre to centre. GI Hanger of size
25 mm, 0.8 mm to 0.9 mm thk at 1200 mm
centre to centre distance. GI Cleat and Steel
Expansion Fasteners Ceiling section of 0.5
mm thickness having curled wedge of 51.5
mm and two flanges of 26 mm each with lips
of 10.5 mm at 600 mm centre to centre.
Connecting clips & 12.5 mm drywall screws
at 230 mm centre to centre. The metallic
grid shall be installed as follows : The
perimeter channel along the perimeter
ceiling with screw fixed to brick wall
partition with the help of rawl plugs and
screws. Joint treatment of ceiling board.
Edge treatment at cove junction. The
intermediate channels shall be suspended
from the ceiling with steel GI cleat and steel
expansion fasteners. The intermediate
channels shall be at 1200 mm centre to
centre distance. The ceiling section placed in
a direction perpendicular to the
Intermediate channels shall be at 600 mm
centre to centre distance including 50 mm
thk x 150 mm wide Recessed, etc. complete
as per detail drawing, as specified and as
directed by Project Manager. with cove light
S
q
m
244
5Providing and Fixing factory made uPVC
door frame, made of uPVC exturded
sections , of size 65 mm x 55 mm with wall
thickness |