| Description |
INSTITUTE OF RICE RESEARCH
PJTSAU, RAJENDRANAGAR, HYDERABAD - 500030
S.NO ITEM : Details
1 BID REFERENCE : Univ. Proc.No.4453/Res.IV/2022-23
Dated: 04.11.2022,
Univ. Memo.No.4412/Res.IV/2022-23
Dated: 16.11.2022 &
Univ. Proc.No.4453/Res.IV/2023 Dated:
15.03.2023
2 DATE FOR SUBMISSION OF
FILLED IN SEALED TENDER OR
BID DOCUMENT
: 23.03.2023 at 4.00 PM
3 OPENING OF TECHNICAL BIDS : 24.03.2023 at 1.00 PM
4 OPENING OF FINANCIAL BIDS : 25.03.2023 at 10.30 AM
5 PLACE OF OPENING BIDS : Principal Scientist (Ento)
and Nodal Officer (drones),
Institute of Rice Research (IRR), PJTSAU
Agricultural Research Institute,
Rajendranagar, Hyderabad – 500030
6 ADDRESS FOR
COMMUNICATION
: Principal Scientist (Ento) and Nodal Officer
(Drones), Institute of Rice Research,
PJTSAU, Agricultural Research Institute,
Rajendranagar, Hyderabad – 500030
Email:varmanrgv@gmail.com
Mobile:9912079464/7396798759
4
TECHNICAL AND FINANCIAL BID DETAILS FOR SUPPLY OF DRONES
(I.SPRAYING DRONE (4 NOS), II. SURVEY DRONE WITH PAYLOAD (1 NO))
I. Spraying Drones (4 Nos**)
Table 1. Technical Specifications of the UAV/ Drone
S. No. Particulars Details
(A) Drone
Classification Small/Medium
Category Multi-Rotor Drones
No. of rotors Hexacopter (6 rotors)
Flight modes Manual, Autonomous, A-B mode
Tank capacity 10 litres or above
Maximum Flying speed 10 m/s
Maximum height of flying 30 m (above 90 feet)
Maximum takeoff weight Up to 50 Kg
Minimum payload capacity 11 Kg
Endurance with maximum
take-off weight up to 50 kg
(while working)
20 min (minimum)
Hovering time (without
payload)
25.0 min (minimum)
Material Carbon fiber and aviation Aluminum
Flight range Minimum 0.5 km within the VLOS
Compact frame design Foldable arms
(B) Spraying assembly
Tank material HDPE, PP or other corrosion resistant material
Connecting tube material HDPE Fiber, PVC or better or other corrosion resistant
material
No. of nozzles 4
Type of nozzle Flat fan spray/ Flat fan spray nozzles with minimum flow
rate of 400 to 500 ml/min
Spray Angle Spray Angle: 80°-110°
Pressure 3 - 20 bar
Spray width/swath 3.0 ~ 5.0 m
Spray flow rate 1.2 to 4.0 lit/min
Droplet size Minimum 100μm, Maximum 350μm
Flow meter Measurement Range: 0.5-5 lit/min,
Accuracy: Minimum 10 ml
Spray efficiency 5-8 ha/day
(C) Battery *
Type Lithium Polymer / Lithium ion
Capacity 22000 mAh
Cycle Minimum 300 cycles *
Charging time 90 min (maximum)
Voltage 22-50 Volts
Depth of Discharge 80%
5
Charging rate & Discharging
rate
0.1C and 4C
(D) Control Unit Suitable flight controller CPU, compatible the above
specifications and as per DGCA guidelines
Intel Core i5 v Pro processor or advanced
Storage: Minimum 500 GB
Memory: Minimum 4GB RAM
Display: 14 inch or larger more with touch screen.
Battery: Min.12 hours’ backup
Interfaces: USB, HDMI/VGA, Ethernet etc. should
confirm IP 65 norms or as per recent norms/guidelines
Max Transmission Distance (Communication distance
between GCS and flying Drone (Km) ≥ 0.5 km
Inclusive of charger
(E) Failsafe Features Return to home in case of: Low battery, Loss of
communication, Manual RTL, Wind, Empty tank and
other fail-safe features
(F) Terrain following radar
system
The drone shall be equipped with terrain following radar
(height sensor, terrain following sensor) to keep certain
desired height above crops when spraying and in turn
detects variable height of crop canopy to enable to spray
uniformly across the crop canopy.
(G) Other Specifications
Hovering accuracy
(horizontal and vertical)
Compatible with above specifications
Wind resistance
Working temperature
Working humidity
Up to 10 m/s
10-70oC
0-90% & compatible with above specifications
Motor/GPS Brushless, compatible with above specifications and as
per DGCA guidelines
** Supply at: 2 Nos: PJTSAU Drone Academy, Rajendranagar, Hyderabad; 1 No: KVK, Kampasagar,
Miryalguda, Nalgonda District; 1 No: KVK, Adilabad |