| Description |
INVITATING QUOTATION FOR: Providing False Ceiling at Sangolli Rayanna College
Entrance of Rani Channamma University, Belagavi.
To,
The Registrar
Rani Channamma University
Belagavi.
Sir,
Sub: Invitation of quotation for providing False Ceiling at Sangolli
Rayanna College Entrance of Rani Channamma University,
Belagavi.
Sealed competitive quotations are invited by the undersigned for the following items.
Sl No Particulars Unit Quantity Rates mount
1
Providing and fixing false ceiling at all height including
providing and fixing of frame work made of special
sections, power pressed from M.S. sheets and
galvanized with zinc coating of 120 gms/m2 (both side
inclusive) as per IS : 277 and consisting of angle cleats
of size 25 mm wide x 1.6 mm thick with flanges of 27
mm and 37mm, at 1200 mm centre to centre, one flange
fixed to the ceiling with dash fastener 12.5 mm dia x
50mm long with 6mm dia bolts, other flange of cleat
fixed to the angle hangers of 25x10x0.50 mm of required
length with nuts & bolts of required size and other end
of angle hanger fixed with intermediate G.I. channels
45x15x0.9 mm running at the spacing of 1200 mm
centre to centre, to which the ceiling section 0.5 mm
thick bottom wedge of 80 mm with tapered flanges of 26
mm each having lips of 10.5 mm, at 450 mm centre to
centre, shall be fixed in a direction perpendicular to G.I.
intermediate channel with connecting clips made out of
2.64 mm dia x 230 mm long G.I. wire at every junction,
including fixing perimeter channels 0.5 mm thick 27 mm
high having flanges of 20 mm and 30 mm long, the
perimeter of ceiling fixed to wall/partition with the help
of rawl plugs at 450 mm centre, with 25mm long dry wall
screws @ 230 mm interval, including fixing of gypsum
board to ceiling section and perimeter channel with the
Sqm
100.00
Page | 3
help of dry wall screws of size 3.5 x 25 mm at 230 mm
c/c, including jointing and finishing to a flush finish of
tapered and square edges of the board with
recommended jointing compound , jointing tapes ,
finishing with jointing compound in 3 layers covering
upto 150 mm on both sides of joint and two coats of
primer suitable for board, all as per manufacturer's
specification and also including the cost of making
openings for light fittings, grills, diffusers, cutouts
made with frame of perimeter channels suitably fixed,
all complete as per drawings, specification and
direction of the Engineer in Charge but excluding the
cost of painting with : Fully Perforated Gypsum Plaster
Board of size 1200 x 2400x12.5 mm having approx. 15 %
perforated area with perforation size and pattern as
approved by the Engineer- in-charge and as per
manufacturer's specification, with all 4 side tapered and
backed by acoustical tissue with NRC value not less
than 0.60
2
Providing & Fixing of Mineral Fibre Suspended Ceiling
System in the module size of 600x600x19mm with
Exposed grid for Hospitals, Shopping malls,
Commercial establishments and office complexes. The
tiles should have Humidity Resistance (RH) of 99%,
Light Reflectance 87%, Thermal Conductivity k = 0.052 -
0.057 w/m K, NRC -0.7,Colour White, Fire Performance
UK A2 S1, dO, with Anti Microbial coating on the face of
the tile, suitable for zone 4 area according to NF S 90-
35:2003 with cleanroom class of ISO 5 (Class 100),
Decontamination Class of CP1Oand Bacteriological
Cleanliness Class B1 for specific strains and reduction
in colony size. Washability properties of 500 wash
cycles as per ASTM D-4828 and suitable for Green
Building application with Recycled content of 37%. The
tile shall be laid on 24mm wide T - section flanges
colour white having rotary stitching on all T sections i.e.
the Main Runner, 1200 mm & 600 mm Cross Tees with a
web height of 38mm and a load carrying capacity of 15
kg/m2 & pull out strength of minimum 100 kg The T
Sections should have a Galvanizing of 90 grams per m2
and need to be installed with suspension system of
approved make.
Sqm 150.00
GST 18%
Total Amount
1. Quoted Price:
a) The Tenderer shall quote for items in the format of quotation attached;
a. The quotation shall be attached with the specification GST payable by the tenderer
b. The rates quoted for each item shall be fixed for the duration of the contract and
shall not be subject to any adjustment.
c. Rates for supply of partial quantity of an item is not acceptable.
d. Corrections if any shall be made by crossing out, initialing, dating and rewriting.
Page | 4
2. Each tenderer must submit only one quotation.
3. Bidder should be enclosed the site visit certificate.
4. Validity of quotations:
The quotation shall remain valid for a period not less than 30 days after the deadline
fixed for submission of quotations
5. Evaluation of quotations:
The Tenderer will evaluate and compare the quotations determined to be substantially
responsive i.e., which are properly signed, and conform to the terms and conditions and
specifications in the following manner:
a. The evaluation will be done including the GST. If the tenderer has not included the GST
in his quotation for the item rate, and has also not indicated the rate of GST applicable,
the quoted rate will be treated as though it is inclusive of the GST and no extra payment
for GST will be made;
b. The evaluation would be done for all the items put together. The items for which no
rates have been quoted would be treated as zero and the total amount would be
computed accordingly. The tenderer who has quoted for partial quantity of any one or
more item(s) would be treated as non-responsive. Purchaser will award the contract to
the responsive tenderer, whose tot |