Name: Provision for construction of the Storage Room under the parking shed near 11 KVa ESS at New Campus, Prem Nagar, Bhiwani
Start: 2024-05-15
End: 2024-05-30
Location: CHAUDHARY BANSI LAL UNIVERSITY BHIWANI

Organization Details:

Organization Name:

CHAUDHARY BANSI LAL UNIVERSITY BHIWANI

Country:

India

Contact Person:

Address:

(Cblu) Opp. Education Board,
Bhiwani, Haryana-127021 ,

Contact Details - Email:

Phone

Notice Details:

Notice Type

Tender Notice

Bidding Type

Other

Notice No.

81749259

Deadline

2024-05-30

Description

Chaudhary Bansi Lal University Bhiwani
(A Stale ( nixeroit) < ablixhed under Haryana Act Nu. 25 of 2014)
CBLU/Engg. 724/ £| . • hared A./rL
Sealed Item Rate Quotations are invited on letter p.- from the approved contractors of any Govt Department th Rate basis abovc/bclow on Haryana PWD Schedu e of Rates-2021. The Quotations/Tenders will be receivi 30-05-2024 upto 05:00 P.M. The quotations/tend. , s shall be opened on 31-05-2024 in the Engineering Oral presence of the contractors or their authorized reprv s ?ntativcs who may like to be present.
Name of the Works: Construction of Storage Room Under Parking Shed near 11 KVa ESS, at New Campus. Nagar, Bhiwani. Estimated Cost: - Rs. 98,623/*
S. No. Descript: no Qty. Rate to be by the a;
1. Brick work with common burnt day non-mo< lar bncks of class designation 7S in superstructure above plinth level up to floor IV evcl In all shapes and sizes in Cement morur 1:6 (1 cement: 6 coarse sand) (HSR 7.22.2 6.51 cum
2. Half brick masonry with common burnt clay non- idular bricks of class designation 7 5 in superstructure above plinth level up to floor IV vel Cement mortar 1 :4 ( 1 cement :4 coarse sand) (HSR 728.2) 30.90 sqm
3. 4. Providing and laying of conglomerate floor 50n- thick cement concrete topping 1 :2:4 (HSR 10.7) . • 12 mm cement plaster of mix :1 :6(1 cement: 6 fir sand) (HSR 11.5.4) 24 53 sqm 8141 Sqm —
5. 15 mm cement plaster of mix :1:6(1 cement: 6 fir sand) (HSR 11.6.2) 2491 Sqm
6. Providing and applying two coats white ccmc based putty of approved brand and manufacturer, over plastered surface and gnndin, the surface smooth with sand paper to get an even and smooth finish Including cost and < arriage of all material. labour charges, scaffolding, sundries etc. complete (HSR 1158) =3— 109 32 Sqm
7. Distempering with oil bound washable distrmpe >f approved brand and manufacture to give an even shade: New work (two or more co * s) over and including water thinnable priming coat with cement primer (HSR 11.64.1) 109 32 Sqm
8 Supply & fixing Windows frames (Chowkhats including mullions consisting frame fabricated from sheet roll formed out of 1.2mm t) k galvanized sheet as per 15:277 (Base steel as per IS 513) with zinc (HSR 13.21.1) Door 1 ime of size 80 mm x 50 mm 11 MU'
-9. Steel work welded in built up sections/ framed « rk. including cutting, hoisting, fixing in position and applying a priming coat of approved eel primer using structural steel etc. as required. In gratings, frames, guard bar, ladd< - railings, brackets, gates and similar worksfHSR 13 29 2) 50 Kg
10 Providing and fixing IS! marked flush door shutters conforming to IS : 2202 (Part 1) non-decorative type, (HSR 1237.1) 35 mm thick 1.95 Sqm
11. Providing and fixing glazed shutters 30 mm tl k for doors, windows and clerestory windows using 4 mm thick float glass panes, indu< ig (HSR 12.1022) 1.11 Sqin
12. Applying priming coat: With ready mixed red oxid zinc chromate primer of approved sqm 15 6 22 brand and manufacture on steel galvanise- non/ steel works) (HSR 11.68.3) 1.35 Sqin
13. Applying priming coat: With ready mixed pink Grey primer of approved brand and manufacture on wood work (hard and soft wood) HSR 11.681) 6.13 Sqm
14. Painting the wooden/metal surface with syndic- enamel paint of approved brand and manufacture to give an even shade Two or more ci ts on new work(HSR 11.82.1) 7.48 Sqin
15. Providing and fixing aluminium sliding door bolts il marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete (HSR No. 12.98 -) Size 250 x 16 mm LNo
16. Providing and fixing aluminium tower bolts, IS! m ked. anodised (anodic c oating not less than grade AC 10 as per IS : 1868 ) transparent o jyed to required colour or shade, with necessary screws etc complete (HSR No. 12.99.3.: - 99.4) 200 x 10 mm. ISO x 10 mm 2 + 6 Nos
17. Providing and fixing aluminium handles. ISl mark.- ' anodised (anodic coating not less than grade AC 1 0 as per IS : 18681 tr uisparent or tveo to required colour or shade. »si-h necessary screws etc complete (HSR No. 12.102.1. i2.1 02.21 100 mm F: M M 2* 4Nos

Soft Copy

Soft copy

Documents

Download documents

In case you are unable to document the documents, please copy the link and paste it in a new tab.

View CHAUDHARY BANSI LAL UNIVERSITY BHIWANI tenders for free on Global Tenders

Filter Your Search