| Description |
Excavation for foundation in earth, soil of all types,
sand, gravel and soft murum, including removing the
excavated material up to a distance of 50 m.
beyond the building area and stacking and
spreading as directed, dewatering, preparing the
bed for the foundation and necessary back filling,
ramming, watering including shoring and strutting
etc. complete. (Lift upto 0.00 to 1.50 m.) By Manual
Means
8.64 Cum
2
Providing dry/ trap/ granite/ quartzite/ gneiss
rubble stone soling 15 cm to 20 cm thick
including hand packing and compacting etc.
complete.
2.35 Cum
3
Providing and laying Cast in situ/Ready Mix
cement concrete in M-10 of trap/ granite/
quartzite/ gneiss metal for foundation and bedding
including bailing out water, Steel centering,
formwork, laying/pumping, compacting, roughening
them if special finish is to be provided, finishing if
required and curing complete, with fully
automatic micro processor based PLC with SCADA
enabled reversible Drum Type mixer/concrete Batch
mix plant (Pan mixer) etc. complete. With fine
aggregate (Crushed sand VSI Grade)
2.47 Cum
4
Providing and laying Cast in situ/Ready Mix
cement concrete M-25 of trap / granite/quartzite/
gneiss metal for R.C.C. work in foundations like
raft, strip foundations, grillage and footings of
R.C.C. columns and steel stanchions etc. including
bailing out water, Steel centering, formwork ,cover
blocks, laying/pumping, compaction and curing
roughening the surface if special finish is to be
provided (Excluding reinforcement and structural
steel) etc. complete, with fully automatic micro
processor based PLC with SCADA enabled
reversible Drum Type mixer/ concrete Batch mix
plant (Pan mixer) etc. complete. With fine aggregate
(Crushed sand VSI Grade)
1.20 Cum
5
Providing and laying Cast in situ/Ready Mix
cement concrete M-25 of trap / granite /quartzite/
gneiss metal for R.C.C. columns as per detailed
designs and drawings or as directed including
steel centering, formwork, cover blocks,
laying/pumping, compaction finishing the formed
surfaces with cement mortar 1:3 of sufficient
minimum thickness to give a smooth and even
surface or roughening if special finish is to be
provided and curing etc. complete,(Excluding
reinforcement and structural steel).with fully
automatic micro processor based PLC with SCADA
enabled reversible Drum Type mixer/ concrete Batch
mix plant (Pan mixer) etc. complete. With fine
aggregate (Crushed sand VSI Grade)
1.55 Cum
6
Providing and fixing in position TMT - FE - 500 bar
reinforcement of various diameters for R.C.C. pile
caps, footings, foundations, slabs, beams columns,
canopies, staircase, newels, chajjas, lintels pardis,
copings, fins, arches etc. as per detailed designs,
drawings and schedules. including cutting, bending,
hooking the bars, binding with wires or tack welding
and supporting as required complete.
0.40 MT
7
Providing second class Burnt Brick masonry with
conventional/ I.S. type bricks in cement mortar
1:6 in foundations and plinth of inner walls/ in plinth
external walls including bailing out water manually ,
striking joints on unexposed faces, raking out joints
on exposed faces and watering etc. Complete.
2.98 Cum
8
Providing sand faced plaster externally in cement
mortar using approved screened sand, in all positions
including base coat of 15 mm thick in cement
mortar 1:4 using waterproofing compound at
1Kilogramper cement bag curing the same for not
less than 2 days and keeping the surface of the base
coat rough to receive the sand faced treatment 6
to 8 mm thick in cement mortar 1:4 finishing the
surface by taking out grains and curing for
fourteen days scaffolding etc.complete.
14.76 Sqm
9
Filling in plinth and floors with approved
excavated material in 15cm. to 20cm. Layers
including watering and compacting etc. complete.
5.47 Cum
10
Filling in plinth and floors with contractors
material/brought from outside and approved by
Engineer incharge in layers of 15 cm to 20 cm
including watering and compaction etc. complete.
5.45 Cum
11
Providing and fixing machine cut machine polished
18 mm to 20 mm thick jet black granite stone for
treads and risers of steps and staircases of approved
colour and shade with full moulding and three
grooved line for the treads on bed of 1:4 Cement
mortar including float filling joints with neat
cement slurry curing polishing and cleaning etc.
complete.
2.25 Sqm
12
Providing and laying 16-20 mm thick and 75mm
wide strips of rough jet black Granite stone (or
equivalent) of approved colour, on ramp to get antiskid effect including cement mortar bedding of 25
mm thick in 1:4 proportion, cement float, machine
cutting, dressing, leveling, jointing, filling the joints
with neat cement slurry or with required pigment,
curing, finishing etc. complete as directed by
Engineer-incharge.
9.00 Sqm
13
Providing and laying polished 18 mm thk. jet black
granite stone as specified below (Machine cut) of an
approved quality and size for paving /flooring in
plain and/or diamond /approved pattern including
cement mortar bedding of 25 mm thick in 1:4
proportion, cement float, machine cutting, dressing,
leveling, jointing, filling the joints with neat cement
slurry or with required pigment, machine polishing
at site, curing, finishing, etc complete as directed by
Engineer In Charge.
12.24 Sqm
14
Providing and Fixing of ATM Porta Cabin of 8' X 8'
X 8'6" Size . Outside Panelling :- M.S. Sheet 1.2 mm
thick (JSW , TATA , ESSAR) & 4 mm Thk |